Help on mounting ext4 usb drive - Raspberry Pi Forums

-

hi,

trying mount usb drive mounted read-only.

blkid have:

code: select all

/dev/mmcblk0p1: sec_type="msdos" uuid="9dcf-4197" type="vfat"  /dev/mmcblk0p2: uuid="f10ba0bd-17e0-4800-b0af-19bb2ed45acd" type="ext4"  /dev/sda1: label="32gb" uuid="ec22c5f222c5c236" type="ntfs"  /dev/sdb1: label="1.41.12-2647" uuid="cd2b07f2-2e61-4f07-b755-9bb754c1d976" type="ext4"
mounted in /etc/fstab

code: select all

proc            /proc           proc    defaults          0       0 /dev/mmcblk0p1  /boot           vfat    defaults          0       2 /dev/mmcblk0p2  /               ext4    defaults,noatime  0       1 /dev/sda1 /mnt/downloads ntfs-3g defaults 0 0 #uuid=cd2b07f2-2e61-4f07-b755-9bb754c1d976 /mnt/usb2 ext4 defaults  0 0
ok other usb drive (ntfs-3g) ext4 formatted drive mounted read-only.

ran fsck.ext4 /dev/sdb1

code: select all

e2fsck 1.42.5 (29-jul-2012) 1.41.12-2647: recovering journal fsck.ext4: no such device or address while trying re-open 1.41.12-2647 signal (11) sigsegv si_code=segv_maperr fault addr=0x1
suggestions? usb faulty? using without problems in windows before.

thanks

/dev/sda1 /mnt/downloads ext4 auto,user,rw,exec 0 0

try that

might want change ntfs-3g ext4 :)


raspberrypi



Comments

Post a Comment

Popular posts from this blog

CAN'T INSTALL MAMBELFISH 1.5 FROM DIRECTORY - Joomla! Forum - community, help and support

-
hi, i want install mambelfish 1.5 component in joomla! 1.0.4 stable [ sundial ] site, reason following error: failed create directory "/home/virtual/site13/fst/var/www/html/components/com_mambelfish/" i new joomla! , still not familiar it. great if build multilingual sites using joomla!. just clarify... media/ writeable administrator/components/ writeable components/ writeable images/stories/ writeable how install component? use  upload package file or use  install directory ? Board index Joomla! Older Version Support Joomla! 1.0 Extensions - 1.0.x Components
Read more

error: expected initializer before 'void'

-
whenever try compile code following error : 'error: expected initializer before 'void'' code: [select] #include <afmotor.h> af_dcmotor motor1(1, motor12_64khz); // create motor #1, 64khz pwm af_dcmotor motor2(2, motor12_64khz); // motor #2 void setup() {  serial.begin(9600);           // set serial library @ 9600 bps  serial.println("motor test!"); } void loop() { go(); backup(); halt(); }   void go() {  serial.println("all motors ahead - fast");    motor1.run(forward);  motor2.run(forward);  motor1.setspeed(255);  motor2.setspeed(255);  return; } void backup() {  serial.println("all motors backward - fast");  motor1.run(backward);  motor2.run(backward);  motor1.setspeed(255);  motor2.setspeed(255);  return; } void halt() {  uint8_t i;  for (i=255; i!=0; i--) ...
Read more

CPU load monitoring using GPIO and leds - Raspberry Pi Forums

-
Image
hello ! wrote today article on blog cpu load monitoring (using gpio , leds) on raspberry's. simple (written in little shell script), think can useful (for people want learn leds stuff on r. pi) there 5 leds turning on , off regarding cpu load: - cpu < 20%: 1 led - cpu < 40%: 2 leds - cpu < 60%: 3 leds - cpu < 80%: 4 leds - cpu < 90%: 5/5 leds - cpu >= 90%: 5 leds flashing here article: written in french, can watch youtube video , download code @ bottom of article. http://www.chteuchteu.com/2012/10/26/ra ... e-au-gpio/ if find errors in code, can post comment on article. ! up code enhancements ? raspberrypi
Read more