Skip to main content

Thread: Resolution

-

first, wanted try linux. no internet wpn111, after 5 days trying internet decided use kubuntu run in virtualbox. can't set resolution higher 800x600..... need edit xorg.conf file every time change , reboot, starts running in low graphs mode. pls me, heres xorg:

# xorg.conf (x.org x window system server configuration file)
#
# file generated dexconf, debian x configuration tool, using
# values debconf database.
#
# edit file caution, , see xorg.conf manual page.
# (type "man xorg.conf" @ shell prompt.)
#
# file automatically updated on xserver-xorg package upgrades *only*
# if has not been modified since last upgrade of xserver-xorg
# package.
#
# note configuration settings done previously
# in file, automatically configured server , settings
# here ignored.
#
# if have edited file automatically updated
# again, run following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

section "device"
identifier "configured video device"
endsection

section "monitor"
identifier "configured monitor"
endsection

section "screen"
identifier "default screen"
monitor "configured monitor"
device "configured video device"
endsection

not getting internet work, screen resolution.

moved absolute beginners.


Forum The Ubuntu Forum Community Ubuntu Official Flavours Support New to Ubuntu [kubuntu] Resolution


Ubuntu

Comments

Post a Comment

Popular posts from this blog

CAN'T INSTALL MAMBELFISH 1.5 FROM DIRECTORY - Joomla! Forum - community, help and support

-
hi, i want install mambelfish 1.5 component in joomla! 1.0.4 stable [ sundial ] site, reason following error: failed create directory "/home/virtual/site13/fst/var/www/html/components/com_mambelfish/" i new joomla! , still not familiar it. great if build multilingual sites using joomla!. just clarify... media/ writeable administrator/components/ writeable components/ writeable images/stories/ writeable how install component? use  upload package file or use  install directory ? Board index Joomla! Older Version Support Joomla! 1.0 Extensions - 1.0.x Components
Read more

error: expected initializer before 'void'

-
whenever try compile code following error : 'error: expected initializer before 'void'' code: [select] #include <afmotor.h> af_dcmotor motor1(1, motor12_64khz); // create motor #1, 64khz pwm af_dcmotor motor2(2, motor12_64khz); // motor #2 void setup() {  serial.begin(9600);           // set serial library @ 9600 bps  serial.println("motor test!"); } void loop() { go(); backup(); halt(); }   void go() {  serial.println("all motors ahead - fast");    motor1.run(forward);  motor2.run(forward);  motor1.setspeed(255);  motor2.setspeed(255);  return; } void backup() {  serial.println("all motors backward - fast");  motor1.run(backward);  motor2.run(backward);  motor1.setspeed(255);  motor2.setspeed(255);  return; } void halt() {  uint8_t i;  for (i=255; i!=0; i--) ...
Read more

CPU load monitoring using GPIO and leds - Raspberry Pi Forums

-
Image
hello ! wrote today article on blog cpu load monitoring (using gpio , leds) on raspberry's. simple (written in little shell script), think can useful (for people want learn leds stuff on r. pi) there 5 leds turning on , off regarding cpu load: - cpu < 20%: 1 led - cpu < 40%: 2 leds - cpu < 60%: 3 leds - cpu < 80%: 4 leds - cpu < 90%: 5/5 leds - cpu >= 90%: 5 leds flashing here article: written in french, can watch youtube video , download code @ bottom of article. http://www.chteuchteu.com/2012/10/26/ra ... e-au-gpio/ if find errors in code, can post comment on article. ! up code enhancements ? raspberrypi
Read more