Skip to main content

Thread: Cannot login to system after upgrade to 9.04

-

i upgraded 8.10 9.04 last week , since them have been unable login system. says athentication failed when try login.
however, if login domain password works.
system has likewise open installed.
m guess pam authentication messed somehow. unfortunately did not add of domain accounts part of sudoers, in bind here.\
if start system in single user, can root shell, cannot change passwords either. system responds
code:
passwd: authentication token manipulation error passwd: password unchanged
of course, system not usable way
use @ work, want avoid losing files. msi wind pc, atom procesor, 2 hard drives in raid 1, , ubuntu installed usb drive.
btw, pretty happy read speed has nas type of built.
installation notes raid follow
code:
scsi device 931.51 gb ata wdc wd1001fals-0 1 , scsi device b 931.51 gb ata wdc wd1001fals-0 1 configured raid 1 @ /dev/md0 mounted on /mnt/raidarr/public total space of 931.51 gb
i thinking repairing pam fix problem. don't want remove likewise yet since way can login system.
not linux guru, can defend myself googling. run vm ubuntu machine @ work main web intranet web server.

i guess no 1 has answer?
able connect thru network samba shares , copied files needed. going see if can copy of etc , conf files modified don't have again , going fresh install ubuntu, before doing suggestions appreciated.


Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Installation & Upgrades [ubuntu] Cannot login to system after upgrade to 9.04


Ubuntu

Comments

Post a Comment

Popular posts from this blog

CAN'T INSTALL MAMBELFISH 1.5 FROM DIRECTORY - Joomla! Forum - community, help and support

-
hi, i want install mambelfish 1.5 component in joomla! 1.0.4 stable [ sundial ] site, reason following error: failed create directory "/home/virtual/site13/fst/var/www/html/components/com_mambelfish/" i new joomla! , still not familiar it. great if build multilingual sites using joomla!. just clarify... media/ writeable administrator/components/ writeable components/ writeable images/stories/ writeable how install component? use  upload package file or use  install directory ? Board index Joomla! Older Version Support Joomla! 1.0 Extensions - 1.0.x Components
Read more

error: expected initializer before 'void'

-
whenever try compile code following error : 'error: expected initializer before 'void'' code: [select] #include <afmotor.h> af_dcmotor motor1(1, motor12_64khz); // create motor #1, 64khz pwm af_dcmotor motor2(2, motor12_64khz); // motor #2 void setup() {  serial.begin(9600);           // set serial library @ 9600 bps  serial.println("motor test!"); } void loop() { go(); backup(); halt(); }   void go() {  serial.println("all motors ahead - fast");    motor1.run(forward);  motor2.run(forward);  motor1.setspeed(255);  motor2.setspeed(255);  return; } void backup() {  serial.println("all motors backward - fast");  motor1.run(backward);  motor2.run(backward);  motor1.setspeed(255);  motor2.setspeed(255);  return; } void halt() {  uint8_t i;  for (i=255; i!=0; i--) ...
Read more

CPU load monitoring using GPIO and leds - Raspberry Pi Forums

-
Image
hello ! wrote today article on blog cpu load monitoring (using gpio , leds) on raspberry's. simple (written in little shell script), think can useful (for people want learn leds stuff on r. pi) there 5 leds turning on , off regarding cpu load: - cpu < 20%: 1 led - cpu < 40%: 2 leds - cpu < 60%: 3 leds - cpu < 80%: 4 leds - cpu < 90%: 5/5 leds - cpu >= 90%: 5 leds flashing here article: written in french, can watch youtube video , download code @ bottom of article. http://www.chteuchteu.com/2012/10/26/ra ... e-au-gpio/ if find errors in code, can post comment on article. ! up code enhancements ? raspberrypi
Read more